Be Careful! Be Sure to Pay Attention to These when Using the Power Trowel machine
Let's talk about how to operate the DYNAMIC power trowel machine. Although the emergence of polishing machine greatly reduces the difficulty and workload of manual polishing, it must not be careless in operation.
If you want to use the trowel well, you must understand the blade. Its quality is directly related to the effect of concrete troweling. When the trowel of the trowel is used, it often rubs with the concrete surface, which will inevitably cause wear after a period of use, so the blade should be replaced after a period of use.
When we choose, we should first look at the material of the blade. If the material is too soft, it will be easy to deform when in use, resulting in unevenness. So we must choose those materials with high rigidity and strength. And choose the blades with wear-resistant materials, because the friction of concrete is large. If the blades are not wear-resistant, they will be damaged if they are not used for a long time. Also ensure that the size of the blade is basically the same, and be sure to keep balance when rotating.
The blade of DYNAMIC power trowel machine is made of high-quality manganese steel, which has the advantages of high material strength, good wear resistance, convenient use and replacement, etc. Widely praised by customers all over the world.
Precautions for trowel operation:
1. Before use, check whether the motor, electrical switch, cable and wiring are normal and comply with the regulations, and install leakage protector.
2. Check and clean the sundries on the wiping tray before use to avoid the jumping of the whole machine during use.
3. The test run shall be carried out after the power is turned on, and the blade shall rotate clockwise without reverse rotation.
4. Operators shall wear insulated shoes and gloves. Cables shall be picked up by auxiliary personnel. Auxiliary personnel shall also wear insulated shoes and gloves. Attention shall be paid to prevent electric shock due to damage of cable insulation.
5. If the polishing machine fails, it must be shut down and cut off the power before maintenance.
6. The polishing machine shall be stored in a dry, clean environment without corrosive gas, and the handle shall be placed at the specified position. Rough loading and unloading shall not be allowed during transfer.
No matter what kind of trowel, we must pay attention to these operation matters to ensure construction safety and reduce unnecessary loss. The construction speed is faster and the operation is more convenient. The important thing is that the ground effect is more uniform, smooth and beautiful.
1983 সালে প্রতিষ্ঠিত, Shanghai Jiezhou Engineering & Mechanism Co., Ltd. কংক্রিট ফ্লোরের ক্ষেত্রে গবেষণা ও উন্নয়ন, উৎপাদন এবং যন্ত্রপাতি বিক্রয়ের উপর দৃষ্টি নিবদ্ধ করে। লেজার স্ক্রীড মেশিন, পাওয়ার ট্রোয়েল, কাটিং মেশিন, প্লেট কম্প্যাক্টর, ট্যাম্পিং র্যামার এবং অন্যান্য যন্ত্রপাতি সর্বশেষ প্রযুক্তি ব্যবহার করে এবং গ্রাহকদের দ্বারা ব্যাপকভাবে প্রশংসিত হয়।
It has customers in more than 100 countries around the world and is a leader in the industry.